Welcome: Carbon Molecular Sieve Manufacturer
Language: Chineseline  English

Carbon Molecular Sieve

  • Carbon Molecular Sieve
  • Carbon Molecular Sieve
  • Carbon Molecular Sieve
  • Carbon Molecular Sieve
Carbon Molecular SieveCarbon Molecular SieveCarbon Molecular SieveCarbon Molecular Sieve

Carbon Molecular Sieve

  • Carbon molecular sieve is a type of new adsorbent, it is the most preferred adsorbent for psa nitrogen separation.

Carbon Molecular Sieve is in black cylindrical appearance,It is a type of porous material accumulated by carbon element

and a type of new adsorbent for nitrogen separation.

Compare with traditional nitrogen making,using carbon molecular sieve for nitrogen making has a series of advantages,

low investment,low energy consumption,quick installation,high-degree automation,fast production.Therefore,carbon

molecular sieve become nitrogen separation most preferred adsorbent in industry fields.Nitrogen separated by carbon

molecular sieve is widely used in the industry of metallurgy,metal heat-treatment,chemical,medicine,pipeline transport,

oil extractions,storage and any other fields.

Working Principle

The principle of nitrogen separation by carbon molecular sieve is on the basis of gas molecule dynamics.In dynamics,gas molecules diffusion rate is depend on its molecule size.

The size of oxygen molecule is smaller than the size of

nitrogen molecule.Thefore,oxygen molecule diffusion rate

is faster than nitrogen molecule.

Carbon molecular contain large number of micropores care

capable for the adsorption of gas molecules.When gas stream

flow through carbon molecular sieves,adsorption for oxygen

molecules reached saturation in a short time.But adsorption

for nitrogen molecules is limited.The mojority of nitrogen

molecules are separated from the gas mixture by carbon molecular sieves,Therefore,the product of nitrogen is enriched.

CMS Type Adsorption Pressure

Nitrogen Purity


Nitrogen Yield


Nitrogen Recovery


CMS220 0.8Mpa 97 340 57
98 260 45
99 245 42
99.5 220 40
99.9 140 27
99.99 100 22
99.999 55 14
CMS240 0.8Mpa 97 360 50
98 285 46
99 260 43
99.5 240 40
99.9 155 29
99.99 110 23
99.999 65 15
CMS260 0.8Mpa 99 320 46
99.5 260 40
99.9 175 29
99.99 120 22
99.999 70 15
Test Temperature All above CMS type tested at the ambient temperature
Particle Diameter Particle diameter 1.3~1.6mm
Bulk density 630~660g/l
Crush Strength 90~100N/Granule
Adsorption cycle 2*60s
Work lifespan 7~8 years
Packing 20kgs/40kgs/75kgs capacity plastic drum for option,palletized loading is acceptable


So called regeneration, in actual is to restore the adsorption capability of carbon molecular sieve to its normal standard by the method of activation.
In long time use process,micropores of carbon molecular sieve are clogged by its excessive adsorbed moisture,rare gases and greasy substances from the air.This phenomeno is called carbon molecular sieve poisioning.Once the micropores are clogged,carbon molecular sieve adsorption capacity would reduce gradually,therefore,result in the deduction of nitrogen productivity and increasing of energy consumption.
Regeneration technology for carbon molecular sieve is a new technology, it is research and developed by ourself according to market demand.
According to feeback from end user and test result from state test center, it is proved that the regenerated carbon molecular sieve adsorption performance could completely retored to normal standard.
The birth of this technology made carbon molecular sieve recycle use come true.It not only effectively protected the natural environment, but also greatly reduced the production cost for the nitrogen production.





Tel: (+86) 572-375665

Email: sales@carbonche.com

Add: No.168,Changchao Industrial Zone,Huzhou City,Zhejiang,China.